Synology DS120j, Руководство по установке оборудования

Страница: 11 / 21

11 Chapter 2: Hardware Setup
LED Indicator Table
LED Indicator Color Status Description
STATUS
Green Static Volume normal
Orange Blinking
Volume degraded / Volume crashed
Volume not created
DSM not installed
Off HDD hibernation
Front LAN
Green
Static Network connected
Blinking Network active
Off No network
DISK
Green
Static Drive ready and idle
Blinking Accessing drive
Orange Static Drive error / Port disabled
1
Off No internal drive / Deep sleep
Power
Blue
Static Powered on
Blinking Booting up / Shutting down
Off Powered off
Note: Model specifications are subject to change without notice. Please refer to
www.synology.com
for the latest information.
1
Please try to restart your Synology NAS or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the health status of the
drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains unresolved, please contact Synology
Technical Support for help.