Synology DiskStation DS920+, Руководство по установке оборудования

Страница: 5 / 23

5 Chapter 1: Before You Start
LED Indicator Table
LED Indicator Color Status Description
STATUS
Green Static Volume normal
Orange Blinking
Volume degraded/Volume crashed
Volume not created
DSM not installed
Off HDD hibernation
Disk 1-4
Green
Static Drive ready and idle
Blinking Accessing drive
Orange Static Drive error/Port disabled
1
Off No internal drive/Advanced HDD hibernation
Power
Blue
Static Powered on
Blinking Booting up/Shutting down
Off Powered off
Rear LAN
(on upper side of jack)
Green
Static Network connected
Blinking Network active
Off No network
Rear LAN
(on lower side of jack)
Green Static Gigabit connection
Orange Static 100 Mbps connection
Off 10 Mbps connection/No network
Note: This table is applicable to Synology NAS running DSM 6.2.3 and earlier. For DSM 6.2.4 and above, please refer to this article for the
latest information.
1
Please try to restart your Synology NAS or re-insert the drives, then run the HDD/SSD manufacturer's diagnostic tool to check the health status
of the drives. If you can sign in to DSM, please run the built-in S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please
contact Synology Technical Support for help.