Synesthesia Mandala Synapse, Руководство пользователя

Страница: 11 / 14

11
Simmons Hi-Hat Controller
Dial trimmer to full clockwise
Strength = 80
Feel = 0
Curve = +5 (Log)
Set pedal open and click Cal Open
Press pedal down and click Cal Closed
Roland FD-7 and FD-8
Enter Raw Mode
Dial trimmer so Raw Mode output = ~166 with pedal open
Exit Raw Mode
Strength = 53
Feel = 0
Curve = 0 (Linear)
Set pedal open and click Cal Open
Press pedal down and click Cal Closed
HAT Kat
Enter Raw Mode
Dial trimmer so Raw Mode output = ~200 with pedal open
Exit Raw Mode
Strength = 90
Feel = 25
Curve = -7
Set pedal open and click Cal Open
Press pedal down and click Cal Closed
Other Pedals
Here are the 6 steps you should take to calibrate Synapse for your eHat:
1. Enter Raw Mode
2. Adjust Input 3 trimmer on bottom of unit until Raw Mode output is at
least 40 and you get the widest possible Raw Mode output range when pedal
moves from fully open to fully closed
3. Click Cal Open with pedal fully open
4. Click Cal Closed with pedal fully closed
5. Exit Raw Mode
6. Set Strength/Feel/Curve to your taste (most pedals only need Feel = 0)