Syneron Candela VelaShape III Скачать руководство пользователя страница 68

Страница: 68 / 86

Cellulite and Circumference Treatment

PB81499EN

Treatment Options with Cellulite Mode

The

Cellulite Mode

treatment protocol can be used as:

●

Standalone for the treatment of cellulite and skin laxity.

●

Combined treatment with

Circumference Mode

for circumference reduction

in addition to the treatment of cellulite and skin laxity.

●

Combined treatment with

Deep Mode

for localized fatty deposits in addition

to the treatment of cellulite and skin laxity.

Treatment should perform as follows (see Table 3):

Table 3: Treatment Options with Cellulite Mode

Treatment

Protocol

Treated

Area

# of Sub-Areas

Treatment Duration

(Recommended)

Cellulite Mode

Thighs

Three (3) sub-areas:

●

Anterior lateral

●

Anterior inner

●

Posterior

10 minutes per sub-area.

Abdomen

Normal Size

- one (1) sub-

area

15 minutes per sub-area, wait 5 minutes
and repeat.

Large Size

- divide

abdomen into half, two (2)
sub-areas

15 minutes per sub-area, wait 5 minutes
and repeat.

Circumference
Mode plus
Cellulite Mode

Thighs

Three (3) sub-areas:

●

Anterior lateral

●

Anterior inner

●

Posterior

15 minutes per sub-area with
Circumference Mode.

10 minutes per sub-area with Cellulite
Mode.

Abdomen

Normal Size

- one (1) sub-

area

15 minutes with Circumference Mode.

15 minutes with Cellulite Mode.

Large Size

- divide

abdomen into half, two (2)
sub-areas

15 minutes per sub-area with
Circumference Mode.

15 minutes per sub-area with Cellulite
Mode.

Deep Mode
plus Cellulite
Mode

Thighs

Three (3) sub-areas:

●

Anterior lateral

●

Anterior inner

●

Posterior

15 minutes per sub-area with Deep Mode
(Cycle #1) **.

10 minutes per sub-area with Cellulite
Mode.

Abdomen

Normal Size

- one (1) sub-

area

15 minutes with Deep Mode (Cycle #1).

15 minutes with Cellulite Mode.

Large Size

- divide

abdomen into half, two (2)
sub-areas

15 minutes per sub-area with Deep Mode
(Cycle #1).

15 minutes per sub-area with Cellulite
Mode.

(*) Perform Deep Mode Cycle #1 only in the zones that require treatment.

(**) When choosing to treat Localized Fatty Deposits and Cellulite with Deep Mode

followed by Cellulite Mode on the thigh area: the sub-area, anterior inner thigh, should

be treated with 15 minutes of Cellulite Mode only (Deep Mode - Cycle #1 will be skipped).

Содержание Candela VelaShape III























































































Результаты поиска

Содержание Candela VelaShape III

Отзывы:

Syneron Candela VelaShape III, Руководство пользователя системы, Страница: 68 / 86

Результаты поиска

Содержание Candela VelaShape III

Отзывы: