Syneron Candela VelaShape III, Руководство пользователя системы, Страница: 18 / 86

System Description
PB81499EN
18
Applicators
The VSmooth and VContour applicators are used for the physical
implementation of the RF current, IR energy and mechanical manipulation
treatment parameters.
The VContour applicator (see Figure 3) utilizes RF and mechanical
manipulation by vacuum. It is used for circumference reduction and focal fat
deposit treatment in different body areas such as: abdomen, flanks, thigh, arms,
middle-back, submental, etc.
The VSmooth applicator (see Figure 4) utilizes IR, RF and mechanical
manipulation by vacuum and massage rollers. It is used for cellulite and skin
treatment in different zones such as: abdomen, thigh, buttocks, arms, etc.
The VelaShape III applicators are composed of a permanent handpiece and a
replaceable cover. The replaceable covers of the VelaShape III applicators are
usable for limited periods of time.
The replaceable cover of the VelaShape III applicator should be replaced
according to the schedule printed on the cover's storage box, or sooner if one of
the following is observed:
●
After cleaning the replaceable cover and applicator spring connectors, an
Improve Vacuum Seal
message appears on the screen.
●
Electrodes appear damaged.
The filter should be cleaned or replaced according to the schedule printed on the
cover's storage box, or sooner if a reduction in vacuum effectiveness is observed.
Figure 3 shows the display and selector controls that are located on the operator
panel of the applicator as well as on the touch-screen control panel (see Figure 3).
Figure 3: VContour Applicator [Left: Operator Panel /
Right: Applicator Elements]
Figure 4 shows the VSmooth applicator and its operating elements: