Synergy SYGS Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 42

background image

38

Please read this manual thoroughly before using this
device and keep it handy for future reference.

Important Safety Notice

• This document does not cover installation, service,
and maintenance situations. For assistance, contact
Synergy Lighting Controls. See contact information
below.
• Installation and technical maintenance must be
performed by a person familiar with the
construction and operation of this product and any
hazards involved. All applicable codes and
ordinances must be followed.
• Service of the equipment must be performed by
qualified service personnel.

Synergy Lighting Controls, a division of Acuity Brands
Inc., assumes no responsibility for claims arising out of
improper or careless use or handling of this product.

Customer Service

Contact Synergy Lighting Controls Technical Service
at 800-533-2719. Synergy Lighting Controls Technical
Service is available from 8:00 a.m. to 5:00 p.m.
Monday to Friday EST for phone consultation.

Email support:

[email protected]

Visit Synergy Lighting Controls on the Internet at
http://www.synergylightingcontrols.com for further
information on products, technical data or installation
instructions.

Address:

Synergy Lighting Controls
1440 Lester Rd.
Conyers, GA 30012

«
...
38
39
40
41
42
»

Содержание SYGS











































Отзывы:

Нет отзывов

Похожие инструкции для SYGS

Бренд: Mandam Страницы: 9

Бренд: PASCO Страницы: 30

Бренд: Ganter Norm Страницы: 20

Бренд: Unika Страницы: 8

Бренд: Cuisinart Страницы: 159

DJ Laptop stand +tray

Бренд: Power Dynamics Страницы: 3

Бренд: Zafferano Страницы: 28

Бренд: Basler Страницы: 33

DynaTrap DT1260-TUN

Бренд: Dynamic Страницы: 4

Бренд: Elma Страницы: 35

Бренд: Qtx Страницы: 6

Бренд: MakAlon Страницы: 36

ANY SPOT AS-1400-2P

Бренд: Galaxy Audio Страницы: 12

Бренд: Knightsbridge Страницы: 4

Бренд: Pepperl+Fuchs Страницы: 2

Бренд: Studiomaster Страницы: 10

Fold Away Strength Trainer F3

Бренд: Torque Fitness Страницы: 44

Бренд: Foxfury Lighting Solutions Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды