Jan 2007
P.13
10. Resolution
Settings
For SUN Servers
●
Resolution configuration procedures should be run by qualified SUN
server administrator
●
Sun Servers are using resolution at 1152 x 900 x 76Hz.
●
Supported resolution mode for 20” LCD:
●
1280 x 1024 x 75Hz
●
You need to change the Sun Server resolution before you connect to
LCD Display.
●
Please do the following procedures to change the resolution settings :
1. As
root:
You may find the following comment “/usr/sbin/m64config”.
2. To view current resolution:
Type “/usr/sbin/m64config – prconf”.
3. To change to 1024x768 @ 70MHz:
Type “/usr/sbin/m64config – res 1024x768x70 now”.
4. The screen will be refreshed.
5. Then type “pkill Xsun”.
And Type “pkill Xsession” to restart the Xsession.
●
Under Common Desktop Environment (CDE).
●
To change the OpenBoot resolution, you can type the following
command in OK prompt.
1. In OK prompt, type “setenv output-device screen:r1024x768x70”.
2. Type “printenv” to confirm the resolution has been changed
to 1024x768x70Hz.
3. Then type, “reset” to restart the system.
Note :
Remember to RESTART the server after these processes.
Note :
Remember to RESTART the server after these processes
User Manual
