©2012 DJI Innovations. All Rights Reserved.
9
craft right
：
15
Gimbal Attitude
5
0
0
Display the 3- axis attitude of the gimbal when a gimbal is
used.
5
0
0
Roll Direction
Pitch Direction
Yaw Direction
16
Compass error
indicator
blink
For NAZA-M user, Blinking
will appear when compass
has errors, please calibrate your compass.
Test
Please use the following procedures to test your installation, in order to make sure the iOSD is working properly.
1.
Ensure batteries are fully charged for R/C transmitter, iOSD and all the other devices on your aircraft.
2.
Make sure all connections and wiring are correct and secure.
3.
Make sure the communication between the wireless video RX and TX modules is normal.
4.
Switch on the R/C transmitter, and power on the iOSD and autopilot system.
5.
Check the LED indicator on the iOSD. The iOSD is powered when the LED is on.
6.
If there are two video inputs, please select an input by toggling the TX 3-position switch; otherwise, please
skip to the next step.
7.
If you use the wireless video RX and TX modules specified by DJI, please select the channel you require by
toggling the TX 3-position switch; otherwise, please skip to next step.
8.
Observe the display screen to make sure the video and iOSD information are displaying on the screen.