GLASS PREPARATION
R9
2
1
2
1
C
A
B
Turn the (0) Position to
A= Center Position +1mm
B= Increases gap of
the door (T) +2mm
C= Center Position +1mm
2
2
3
3
±2°
(0) Position
Additional adjustments : loosen lock screws as necessary
Mark hole's
position
Drill hole
CONTENTS
ADJUSTMENT
Adjustment of closing speed:
-Two regulating valves
(Ⅰ)
and (
Ⅱ)
.
- decrease speed.
- increase speed.
-Valve (
Ⅰ)
:control closing range 170°-15°
-Valve (
Ⅱ)
:control latching range 15°-0°
CONTENTS
Max. 0.5 turn
Use appropriate
gaskets as supplied.
10~12mm
Fixing instructions for:
S4803 Self Closing Patch Fitting Power 3
www.synergyhardware.co.uk
ISSUE 2:02/19
10802 IN-350-SY
Hold Open point
(for optional model)
Hold Open point
(for optional model)
