After hardware & software installation, please take the following steps to con
fi
gure the handle.
If the OS platform of the notebook computer is
MS Windows 7
, please take the following steps :
- Right Click
Utilities
, and then Select “
Properties “
.
- Click the “
Compatibility
“ tab.
- Tick the box “
Run this program as an administrator
”, and then Click “
OK
” .
If don’t take the above steps, the UI will not display properly.
< 5.1 > Initial Handle Confi guration
Part V. Software Usage
( 1 ) Prepare the notebook computer installed with utilities software
( 2 ) Connect to the handle via the handle data input cable ( DLS-201 )
( 3 ) Make sure the handle in power ON status
( 4 ) Con
fi
gure the handle according to the UI
( 5 ) After
fi
nish the handle con
fi
guration, please repeat the steps for other handles
One by One
To
USB port
To
handle data
connector
Handle Data Input Cable
DLS-201
Page 25
www.RackmountMart.com
