Calibration/ unit setup
The unit when purchased has default settings therefore the instrument needs to be set/
calibrated to suit user requirements.
The unit up arrow
is used to scroll through setting parameters as well as the tare
button. The PROG button is used store any changes made to parameters in the unit as
well as skip through setup parameters to display actual unit reading. The
right arrow is used to display default setting of given parameter as well as
change the setting.
The unit
serial number
can be displayed by powering up the unit while the PROG button
is pressed; pressing the PROG button again displays the
software version
. When PROG
button is pressed again unit will display the measurements.