SMP-M240
USER_MANUAL
11
www.syncrown.com
3.3 Interface and printing
3.3.1 Serial Interfaces
This model of printer uses DB-9 serial interface cable (one end is D model standard
serial interface socket, connected to host computer, the other end is PS/2 socket,
connected to printer)
3.3.2 Infrared ray (IR) & IrDA interface
SMP-M240 can be connected to your main device through IR, RAW-IR and IrDA can
not be available at the same time. Reset the printer if it is not the model you want.
When printing through RAW-IR and IrDA, make infrared ray of main device right
towards to infrared ray window of printer, distance should be less than 50mm (varies
with main device), angel should be less than 3
0°.
3.3.3 Bluetooth
PDA with Bluetooth interface, laptop and other information terminals can drive the
mobile thermal printer SMP-M240. Instructions as follows:
1. Power on printer
2. Main device search for outer Bluetooth devices.
3. If there are some outer Bluetooth devices, choose “Syncrown”.
4. Enter password”0000”
5. Finish matching
In pairing, mobile thermal printer SMP-M240 must be turn on.
Note: when pairing, do not set many printers on, otherwise it can‘t figure out which
one succeeds in pairing.
Having finished pairing, other main devices (main devices) still can pair with mobile
thermal printer. The max main devices of each printer are 8. If more than 8, the
earliest ones will be deleted from printer paring list automatically. If these earliest
main devices want to drive printer to print and need pairing again.
After pairing, main devices with virtual Bluetooth interface
（
smart phone , pocket
PC, palm, notebook
）
can drive mobile thermal printer SMP-M240 to printer
through such virtual Bluetooth interface.
