Syncronorm V:Server
4
© 2015 Syncronorm GmbH
1.3
Checking the scope of delivery
Check that the scope of delivery is complete. Keep the packaging for later transport. If components are
damaged or missing, contact your Syncronorm supplier. The DEPENCE software can be installed on
PCs using the Windows operating system. To download the current software and firmware, visit the
Syncronorm website.
1.4
Intended use
V:Server U8 / U16 , referred to in the following as "unit", may only be used as specified in the following:
- For controlling DMX and DMX-RDM compatible units (e.g. pumps, nozzles, spotlights).
1.5
Safty information
Hazards to persons and assets may emanate from this unit if it is used in an improper manner or not in
accordance with its intended use, or if the safety instructions are ignored.
This unit can be used by children from the age of 8 and by persons with physical, sensory or mental
impairments or lack of experience and knowledge, as long as they are supervised or instructed on how to
use the unit safely and are able to understand the potential hazards. Do not allow children to play with
the unit. Do not allow children to clean or maintain the unit without close supervision.
1.5.1
Hazards encountered by the combination of water and electricity
The combination of water and electricity can lead to death or severe injury from electrocution, if the unit
is incorrectly connected or misused.
Prior to reaching into the water, always switch off the mains voltage to all units used in the water.
1.5.2
Correct electrical installation
Electrical installations must meet the national regulations and may only be carried out by a qualified
electrician.
A person is regarded as a qualified electrician, if, due to his/her vocational education, knowledge and
experience, he or she is capable of and authorized to judge and carry out the work commissioned to
him/her. This also includes the recognition of possible hazards and the adherence to the pertinent
regional and national standards, rules and regulations.
For your own safety, please consult a qualified electrician.
The unit may only be connected when the electrical data of the unit and the power supply coincide.
The unit data is to be found on the unit type plate or on the packaging, or in this manual.
Ensure that the unit is fused for a rated fault current of max. 30 mA on the mains side by means of a
fault current protection device.
1.5.3
Safe operation
Never operate the unit if either the electrical cables or the housing are defective!
Do not carry or pull the unit by its electrical cable.
Route cords/hoses/lines in a way that they are protected against damage, and ensure that they do not
present a tripping obstacle.
Only open the unit housing or its attendant components, when this is explicitly required in the
operating instructions.
Only execute work on the unit that is described in this manual. If problems cannot be overcome,
please contact an authorized customer service point or, when in doubt, the manufacturer.
Only use original spare parts and accessories for the unit.
Never carry out technical modifications to the unit.
Only operate the unit if no persons are in the water!
The unit, the connections and plugs are not water-proof and must not be routed or installed in water.
