Syncronorm SyncroADC, Руководство по эксплуатации

Страница: 5 / 13

(C) 2021 Syncronorm GmbH
5
Checking the Scope of Delivery
Please check that the scope of delivery is complete. Keep the packaging for later transport. If
components are damaged or missing, contact your Syncronorm supplier via info@syncronorm.de .
Scope of delivery:
1x SyncroADC 0..10V to DMX Multiplexer
Please note that a programming adaptor (3000P) is not included with DIN rail mount devices. A
programming adaptor (required to set DMX start addresses and operating options) must be ordered
separately.
This unit requires the SyncroTools DMX address board (SN-STADRB) (not included).
Intended Use
The Syncronorm DMX Multiplexer 3112A-H will convert analog input voltages to digital DMX512 signals
according to USITT DMX512/1990 (United States Institute for Theatre Technology, www.usitt.org) , ANSI
E1-11 DMX512-A (www.ansi.org) or DIN56930-2 (www.din.de). All types of equipment labeled with „DMX-
512“ or „DMX-512/1990“ may be connected.
Safety Information
Danger to persons and assets may emanate from this unit, if it is used in an improper manner or not
in accordance with its intended use, or if the safety instructions are ignored. This unit must not be used
by children under the age of 18. Persons with impairments or lack of experience and knowledge may
use the unit, as long as they are supervised and instructed on how to use the unit safely and are able to
understand the potential risks. Do not allow children to play with this unit. Do not allow children to clean
or maintain the unit.
Correct electrical Installation
• Electrical installations must meet the national regulations and may only be carried out by a qualified
electrician.
• A person is regarded as a qualified electrician, if, due to his/her vocational education, knowledge and
experience, he or she is capable of and authorized to judge and carry out the work commissioned
to him/her. This also includes the recognition of possible dangers and the adherence to the pertinent
regional and national standards, rules and regulations.
• For your own safety, please consult a qualified electrician.
• The unit may only be connected when the electrical data of the unit and the power supply coincide.
The unit data is to be found on the unit type plate or on the packaging, or in this manual.
• Ensure that the unit is fused for a rated fault current of max. 3A on the mains side by means of a fault
current protection device.
SAFETY INSTRUCTIONS