USE WITH OTHER SCSI DEVICES
Since the SCSI standard supports connection to one computer and up to
seven SCSI devices (including SCSI devices built into the computer), you
can use several PCM-CR-S2I PC card drives in series or connect the PCM-
CR-S2I drive to other SCSI device(s).
Plug one end of the SCSI cable to the SCSI connector, and the other into the
SCSI connector at the rear of this drive unit. Securely plug the cable end
into the connector. The order of the SCSI devices to be connected can be
changed.
SETTING THE SCSI ID
The SCSI ID is a unique number assigned to each SCSI device. Therefore,
two devices must not have the same ID number. The SCSI ID is
independent of the order of physical device connection. In general, SCSI
ID=7 is assigned to the computer and ID numbers 0 to 6 are available for
other SCSI devices. Note that SCSI ID’s may have been previously assigned
to a disk drive, CD-ROM drive, or other built-in devices in the computer. To
obtain this information, refer to the related computer and SCSI device
manuals. Take care not to use the same SCSI ID number more than once.
13
.........................
.........................
. . . .
.........................
.........................
. . . .
PCM-CR-S2I
PCM-CR-S2I
.........................
.........................
. . . .
Other SCSI Device
