1.3 Grounding and connecting a brake
Please make sure you ground the board properly.
Your configuration will look like this:
1.3.1 Connecting a Brake
If your system has an attached brake, please connect the brake cables to Phase D and Ground. These
two threads should be twisted together or at least be paired to have a minimum area between them.
For mounting please refer to our mounting instructions:
Hardware Manuals / SOMANET Node / SOMANET Node rev. C.4 /
Installation Guide
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.7.3 | Built 2021-03-29
15/17
