Synapse SNAPstick SN 132, Быстрый старт

Страница: 5 / 7

Introduction
The SN 132 SNAPstick is designed to be a compact and easy way to connect a PC to a SNAP wireless network.
Figure 1 - Overhead view of SN 132 SNAPstick (no RF Engine installed )
The module supports all existing forms of the Synapse RF engine and is fully compatible with Synapse’s Portal
management software.
On- Board Indicators
A Tri-color LED is available as an output indicator. This component has the ability to emit a red, green, or amber
light. It can be controlled by SNAPpy scripts (running on the SNAPstick) that manipulate GPIO pins 0 and 1.
User Accessible LED Power Indicator LED
Figure 2 - On board LEDs
The following table describes the how to control the output pins to obtain desired colors. Notice that the LED lines
are active LOW.
Desired LED Color Value of GPIO Pin 0 Value of GPIO Pin 1
Red Low High
Green High Low
Amber Low Low
OFF High High
SN 132 SNAPstick 1