Connectivity Options
Two terminal blocks (one on each side of the board) provide access to all of the GPIO pins,
plus
various POWER, GND, and RESET signals.
NOTE that these terminal blocks DO NOT have the exact same pinout as the two headers
on the RF Engine!
The RF Engine headers have
24 pins
total, the breakout board terminal blocks have
28 pins
total. The extra pins are additional GND and POWER connections.
Notice the power (VCC) pin between GPIO6 and GPIO7.
Also notice the power (VCC) pin between GPIO14 and GPIO15, and also one next
to GPIO18.
In addition to the two terminal blocks, these signals are also available at connector J2 (if loaded).
Document Number 600-0011A