Synaccess NC-08, Руководство пользователя

Страница: 43 / 46

User’s Manual
Synaccess Networks, Inc.
www.synaccess-net.com (760) 930 – 0473 Page 43 of 46
Appendix A Serial Console Port Interfaces
Local Master Port - DB-9 Female DCE
Pin # Name Long Name Direction Description
1
DCD Data Carrier
Detect <<< Raised when an carrier communication is
established.
2 TD Transmitting
Data >>> Serial data stream sent to the DTE device.
Same note as above apply.
3 RD Receive
Data <<< Receives serial data stream.
4 DSR Open <<< Not connected.
5 GND Signal
Ground
6 DTR Terminal
Ready
>>> Indication of serial port activated.
7 CTS Clear To
Send
<<< When hardware flow control is enabled, if this
signal is raised, an external device can send data
to Local Master Port.
8 RTS Request To
Send
>>> When hardware flow control is enabled, this
signal is raised by the Local Master Port when it
is ready to receive new data from an external
device.
9 Open Open
User Console Port - DB-9 Male DTE
Pin # Name Long Name Direction Description
1
Open <<< Open
3 TD Transmitting
Data >>> Serial data stream sent to the DTE device.
Same note as above apply.
2 RD Receive
Data <<< Receiving serial data stream.
4 Open >>> Open
5 GND Signal
Ground