Quick Reference
931318D
© 2018, Syn-Apps L.L.C. ALL RIGHTS RESERVED
© 2018, Syn-Apps L.L.C. ALL RIGHTS RESERVED
931318D
Quick Reference
Features
Enclosure Features
SPD Link/Act.
PWR Status
Volume
RTFM
VoIP
Loudspeaker
Speaker Volume
Speed (SPD) LED (
AMBER
)
The
Speed (SPD)
LED illuminates
AMBER
for a 100Mb link
or is off for a 10MB link when the network link to the device is established.
Status LED (
GREEN
)
The
GREEN
Status
LED illuminates after supplying power to the device.
Link/Activity (Link/Act.) LED (
GREEN
)
The
GREEN
Link/Activity (Link/Act.)
LED blinks to indicate network traffic.
Power (PWR) LED (
GREEN
/
BLUE
)
The
Power (PWR)
LED is
GREEN
in low power mode (
802.3af)
and
BLUE
during high power mode (
802.3at).
RTFM Switch
To broadcast the device’s current IP address, press and hold the RTFM switch for a couple
of seconds and then release it.
To restore the factory defaults, complete the following steps:
1. Press and hold the RTFM switch until you hear the device announce the words,
“restoring defaults” and “rebooting”.
2. Release the RTFM
switch. The device will be restored to the factory default settings.
*See the Operations Guide for more information about the features in this section.
HINGES
LATCHES
COVER OPEN LEFT
THREE CABLE GLAND WITH
ONE HOLE PLUG
Dimensions
Mounting Bracket
5.12 [130]
7.87 [200]
11.81 [300]
Notes:
1. Dimensions
are in inches
[millimeters].
2. Projection:
Third Angle
Pull the mounting bracket
outward while tightening the
screw. Do the same to all
four mounting brackets.
