3
Installation
1) Insert faucet body (E) through
deck surface.
2) Slide mounting gasket (G) and
metal washer (H) on to fasteners (X).
Secure with mounting nuts (I).
Note:
Hoses removed for clarity.
3) Install plumber tape to inlets of
shut-off valves. Attach supply lines
to shut-off valves and hand tighten.
Using a wrench, finish with one-
half turn.
DO NOT
overtighten.
4) Apply plumber putty to underside
of flange (L).
5) Insert flange (L) into drain
opening. From below, attach
drain body (Q) with gasket (M)
and washer (N) to flange (2-3
turns until hand tight).
Note:
Make sure drain cavity (on
drain body) faces rear of sink.
6) From below, tighten flange nut (O)
to secure drain body (Q).
DO NOT
overtighten.
Note:
Make sure flange is centered
in drain opening.
7) Insert stopper (K) into flange (L)
and rotate to proper position.
Note:
Stopper can be installed
removable or non-removable
determined by eye hole position.
1
2
G
X
H
I
1
1
2
E
L
3
1
2
L
Q
M
N
OPTIONAL
O
Q
K
Non Removable
K
L
Removable
K
Removable
Optional:
Adjust limit stop washer
to limit handle turn to the
hot position if desirable.
2
1
3
_
+