Symmetry EN-7510, Руководство по установке

Страница: 7 / 23

Symmetry EN-7500 Series EN-7510 Installation Guide
9600-0541 Issue 1.1 Page 7 of 23
1. Analog video out
Analog video output port (PAL or NTSC as appropriate).
2. Reset
Reset switch is used for restarting or resetting the camera to Factory Default (FD).
Refer to the section “
6.3. Reset
”
for more specific information.
3. USB connector
Insert a USB storage device.
4. 9 pin terminal block for D/I, D/O, audio, and serial communication
Refer to the section “
5.1.Connectors
”
for more specific information.
5. Power Adaptor Connector (DC 12V)
The camera needs a DC12V for power supply.
Refer to the section “
Power Adaptor
Connector (DC 12V)
”
for more specific information.
Caution
!
Make sure the polarity is correct. Incorrect connection may cause
malfunction or damage to the IP device.
6. Micro SD Card socket
Memory card slot for external storage.
7. LAN Connector (Ethernet)
RJ45 LAN connector for 10/100 Base-T Ethernet.
8. 4 Pin connector for Auto IRIS
Only DC-drive type is supported.
Refer to the section “
4.2. Installing an Auto IRIS
lens
”
for more specific information.
+ -
Status LED Network LED