Symmetron TILTOMETER, Руководство пользователя

Страница: 12 / 12

6 CONNECTING TO A DATA LOGGER
6.1 CONNECTIONS
TILTOMETER GENERIC
DATA
LOGGER
STYLITIS-41 STYLITIS-101
(1)
BATTERY
Screw #10 BAT- - - - BAT −
Screw #9 BAT+12V - - - BAT +
Screw #1 AZIMUTH ANALOG CHANNEL ANY ANALOG IN ANY ANALOG IN -
Screw #2 ELEVATION ANALOG CHANNEL ANY ANALOG IN ANY ANALOG IN -
Screw #3 AN. GND ANALOG GROUND GROUND GROUND -
6.2 SETTINGS
These settings deliver recorded values from 0 to 360 degrees for azimuth and from -90 to 90
degrees for elevation:
Data loggers with a 0 to 5V input range:
AZIMUTH
ELEVATION
SLOPE 72.0 36.0
OFFSET 0.0 -90.0
Data loggers with a 0 to 2.5V input range
(2)
:
AZIMUTH
ELEVATION
SLOPE 144.0 72.0
OFFSET 0.0 -90.0
NOTES:
(1) On Stylitis-101, connect the AN [-] inputs to the GND on the screw terminal. Set the input
range to 0~5V, Unipolar.
(2) For data loggers with input range equal to 0~2.5V, use the RS232 port to set the
Tiltometer’s output range to half. Issue the command: !RANGE=HALF (See 3.2).
(3)
S-UME-TILT_1_0-004 12