www.
Symmetrikit
.com
11
Gull wing arms
Located towards the back of
each arm on the outside - as
shown, is a small release knob
that needs to be pulled out
whilst lifting the arm up.
Reverse this action to lower
each arm back in to its place.
Located towards the back of each arm on the inside - as shown below - is a small release clamp that needs
to be pulled up whilst lifting the arm up in order to adjust the height and then reclamp to hold the position.
Arm
width
adjustment
(from 455 - 537mm)
Following on from the instructions above to lift the arms, underneath - unscrew the thumb wheels as shown
below - and move the arms to desired position/width before re-tightening. Lower the arm back down gently.
Arm
height
adjustment
(from 195 - 240mm)
Содержание SENCILLLA
Страница 1: ...User Handbook Simple Supportive Seating ...