Symmetricom XL-GPS, Руководство пользователя

Страница: 43 / 239

Configuring the Network Port
imentation d'énergie doit être seulement opérée à 100 - 240 VCA, 50-60 hertz.
l
Relier le XL-GPS à une prise de courant avec contact adéquat de mise à la terre.
WARNING Removing Power
Prior to removing the top cover, disconnect all power connections.
AVERTISSEMENT: Avant d'enlever le couvercle, débranchez le courant
électrique..
CAUTION Stopping the XL-GPS
Avoid removing power while the XL-GPS is operating. Stop the operating system before
removing power.
AVERTISSEMENT:
: Évitez de couper le courant électrique pendant que le XL-GPS
fonctionne. Veuillez fermer le système d'exploitation avant d'enlever le courant.
Configuring the Network Port
The following additional steps are required to make the XL-GPS operational on a network.
Make the XL-GPS operational on a network if you plan on:
• Managing the XL-GPS remotely over the network
• Distributing timing information from the XL-GPS over the network
Press Result
ENTER Displays “
FUNCTION
”
100 Enters 100 as the function number
ENTER Displays Function 100’s first screen: “
COMPANY 00-A0-69…
”
ENTER Displays “
IP ADDRESS…
”
1-9… Enter the unit’s IP Address (e.g., 192.168.0.11
ENTER Displays “
SUBNET MASK…
”
1-9… Enter the Subnet Mask (e.g., 255.255.255.000)
ENTER Displays “
DEFAULT GATEWAY…
”
1-9… Enter the Default Gateway’s IP address (e.g., 192.168.0.1)
ENTER Displays “
10 100 BASE-T – 10
”
ENTER Displays “
REMOTE LOCKOUT – UNLOCK
” (Leave unchanged)
098-00116-000 Rev. A ............................... Page 29 of 221