3 of 4
QUICK START GUIDE:
xIO Bluetooth RCA-3.5
www.symetrix.co
| +1.425.778.7728
PN 53-0087 Rev A 10/21
If you are putting xIO Bluetooth RCA-3.5 on an existing network,
a network administrator will be able to provide the above
information or it may have been provided automatically by a
DHCP server. For security reasons, it is not recommended to
put xIO Bluetooth RCA-3.5 directly on the Internet. If you do,
a network administrator or your Internet Service Provider can
provide the above information.
If you are on your own private network, directly or indirectly
connected to the xIO Bluetooth RCA-3.5, you may allow the
device to choose an automatic IP address or you may choose to
assign it a static IP address. If you are building your own separate
network with static assigned addresses, you may consider using
an IP Address from one of the ”Private-Use” networks noted in
RFC-1918:
1. 172.16.0.0/12 = IP Addresses 172.16.0.1 through
172.31.254.254 and a Subnet Mask of 255.240.0.0
2. 192.168.0.0/16 = IP Addresses 192.168.0.1 through
192.168.254.254 and a Subnet Mask of 255.255.0.0
3. 10.0.0.0/8 = IP Addresses 10.0.0.1 through
10.254.254.254 and a Subnet Mask of 255.255.0.0
Configuring IP Parameters
Locating Hardware
Discovery of, and connection to, xIO Bluetooth RCA-3.5
hardware is done with the Locate Hardware dialog found under
the Hardware menu or by clicking the Locate Hardware icon in
the tool bar or on a particular xIO Bluetooth RCA-3.5 unit itself.
IP Configuration with Composer
The Locate Hardware dialog will scan the network and list
available units. Select the xIO Bluetooth RCA-3.5 unit you wish
to assign an IP address to and click the Properties button. If
you wish to assign xIO Bluetooth RCA-3.5 a static IP address,
select “Use the following IP address” and enter the appropriate
IP Address, Subnet mask and Gateway. Click OK when
finished. Now, back in the locate hardware dialog, ensure the
xIO Bluetooth RCA-3.5 device is selected and click “Select
Hardware Unit” to use this xIO Bluetooth RCA-3.5 hardware in
your Site File. Close the Locate Hardware dialog.
Reset Switch
To be used under the
supervision of technical support, it has the ability
to reset the xIO Bluetooth RCA-3.5’s network
configuration and completely reset the unit to factory
defaults. Locate the reset switch through the vents on
the bottom side of the T-10 Glass rear cover.
1. Short press and release: Reboots the unit.
2. Long press and hold, release when unit reboots:
Resets network configuration, returns to DHCP.
3. Apply power while holding, release after unit boots
then reboots: Factory resets unit.
- or -
- or -
↓
Declaration of Conformity
We,
Symetrix Incorporated
, 6408 216th St. SW, Mountlake Terrace,
Washington, USA, declare under our sole responsibility that the
product:
xI
O Bluetooth RCA-3.5
to which this declaration relates, is in conformity with the following
standards:
EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3
(EMC-International),
FCC Part 15 (EMC-USA),
ICES003, RoHS (health/environmental)
The technical construction file is maintained at:
Symetrix, Inc.
6408 216th St. SW
Mountlake Terrace, WA, 98043 USA
The authorized representative located within the European
Community is:
World Marketing Associates
P.O. Box 100
St. Austell, Cornwall, PL26 6YU, U.K.
Date of issue: January 15th, 2019
Place of issue: Mountlake Terrace, Washington, USA
Authorized signature:
Mark Graham, CEO, Symetrix Incorporated.
