���������������������
AUX POWER
BOTH SUPPLIES MAY BE CONNECTED AT THE SAME TIME
INPUT
6W MAX
100-240V
50/60Hz
WARNING! 15VDC!
USE ONLY WITH
ARC DEVICES!
RS-232
RELAY
OUT
O / C
OUT
CONTROL IN
RS-485
NO C NC
2 1
2B
1B 1A
2A
HOST
: 57k / 1
15k
RS-232: ACC / HOST
BOOT MODE
UNIT
1 2
4
3
2
1
12
ANALOG OUTPUTS
ANALOG INPUTS
+24VDC
2.5A
11
10
9
8
7
6
5
ETHERNET/
COBRANET
ETHERNET
ANALOG INPUTS
4
3
2
1
ANALOG INPUTS
�������
Express
�����������
MANUFACTURED BY SYMETRIX, INC. MOUNTLAKE TERRACE , WA USA
THIS UNIT CONTAINS NO USER SERVICEABLE PARTS
FABRIQUÉ AUX E.-U. PAR SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA
PAS DES ELEMENTS SERVIABLE PAR UTILISATEUR
ARC
GND B A
DEVICE CONFIG
�������������������������������������������������
(425) 778-7728
www.symetrixaudio.com
SymNet
Express is
confi gured
and controlled
from SymNet
Designer
™
.
Express
(without CobraNet) is intended for auditoriums,
boardrooms, churches, courtrooms, hotels – any stand-
alone application where a single DSP unit handles
everything between the microphones and the amplifi ers.
Your choices are 12x4, 4x12, and 8x8.
Express Cobra
provides a cost-effective tool to network
audio between amplifi ers, powered speakers, and the
growing legion of products supporting the CobraNet
audio standard. Express Cobra units can freely exchange
up to 8 channels of bi-directional audio on a single CAT5
cable with other Express Cobras, CobraLink-equipped
SymNet rings, or third party CobraNet-compatible gear
located in distant areas of a venue. Choices are 12x4,
4x12, 8x8, and 4x4.
Network Control
of all Express models is via 10/100
Ethernet, each unit having a unique IP address. When
integrated into a LAN, complete Express control is
available from anywhere on the network.
External control
of SymNet Express is accomplished
by connecting rotary encoders, contact closures, analog
pots or our own ARC (Adaptive Remote Control) wall
panels. Express also directly interfaces with touch screen
technologies from AMX and Crestron.
What about security?
Express supports multi-tiered
access to user control screens while protecting hardware
from unauthorized access.
SymNet Designer application software
works across
the SymNet family of hardware products providing over
300 DSP modules and more than 50 control modules. Our
design team constantly adds features, and as they do, we
post them online. They’re yours for the taking.
It’s called Express
because it’s fast to install, connect,
control, and update. Symetrix brings its considerable
expertise in DSP design to Express to provide an
extraordinary value in audio signal processing.
Come on, catch the Express
cat
cat
.
SymNet
™
Express
Symetrix
Internal AC Supply
Connector for optional
redundant power supply
The ARC™ Port -
Direct connection via CAT-5
cable to SymNet ‘Adaptive
Remote Control’
RS-232 port connects to external
controller or host PC
RS-485 external
control port
Sets baud rates and
network address
Ethernet/CobraNet ‘dual’ port
External control binary outputs
Analog control inputs
Analog audio inputs
and outputs
Ethernet
control/data
port
© 2001-2004, Symetrix, Inc. All rights reserved.
Analog
In
Analog
Out
Cobra
In/Out
Analog
Control
Inputs
Relay
Output
Open
Collector
Outputs
RS-232
Host/
Control Port
Ethernet
Control
Port
RS-485
Control
Port
Optional
Redundant
Power Supply
Express 12x4
12
4
-
2
1
2
yes
yes
yes
yes
Express 4x12
4
12
-
2
1
2
yes
yes
yes
yes
Express 8x8
8
8
-
2
1
2
yes
yes
yes
yes
Express 12x4 Cobra
12
4
8/8
2
1
2
yes
yes
yes
yes
Express 4x12 Cobra
4
12
8/8
2
1
2
yes
yes
yes
yes
Express 8x8 Cobra
8
8
8/8
2
1
2
yes
yes
yes
yes
Express 4x4 Cobra
4
4
8/8
2
1
2
yes
yes
yes
yes
Choose the Express confi guration that meets your requirements and budget ...
