background image

571

20

Warranty & Service

Chapter 11

571 Limited Warranty

Symetrix, Inc. expressly warrants that the product will be free from defects in material and workman-

ship for one (1) year. Symetrix's obligations under this warranty will be limited to repairing or

replacing, at Symetrix's option, the part or parts of the product which prove defective in

material or workmanship within one (1) year from date of purchase, provided that the Buyer

gives Symetrix prompt notice of any defect or failure and satisfactory proof thereof. Products

may be returned by Buyer only after a Return Authorization number (RA) has been obtained

from Symetrix. Buyer will prepay all freight charges to return the product to the Symetrix

factory. Symetrix reserves the right to inspect any products which may be the subject of any

warranty claim before repair or replacement is carried out. Symetrix may, at its option, require

proof of the original date of purchase (dated copy of original retail dealer's invoice). Final

determination of warranty coverage lies solely with Symetrix. Products repaired under warranty

will be returned freight prepaid by Symetrix via United Parcel Service (surface), to any location

within the Continental United States. At Buyer's request the shipment may be returned via

airfreight at Buyer's expense. Outside the Continental United States, products will be returned

freight collect.

The foregoing warranties are in lieu of all other warranties, whether oral, written, express,

implied or statutory. Symetrix, Inc. expressly disclaims any IMPLIED warranties, including

fitness for a particular purpose or merchantability. Symetrix's warranty obligation and

buyer's remedies hereunder are SOLELY and exclusively as stated herein.

This Symetrix product is designed and manufactured for use in professional and studio audio

systems and is not intended for other usage. With respect to products purchased by consum-

ers for personal, family, or household use, Symetrix 

expressly disclaims all implied warran-

ties, including but not limited to warranties of merchantability and fitness for a particular

purpose.

This limited warranty, with all terms, conditions and disclaimers set forth herein, shall extend

to the original purchaser and anyone who purchases the product within the specified warranty

period.

Symetrix does not authorize any third party, including any dealer or sales representative, to

assume any liability or make any additional warranties or representation regarding this product

information on behalf of Symetrix.
This limited warranty gives the buyer certain rights. You may have additional rights provided

by applicable law.

Limitation of Liability

The total liability of Symetrix on any claim, whether in contract, tort (including negligence) or

otherwise arising out of, connected with, or resulting from the manufacture, sale, delivery,

resale, repair, replacement or use of any product will not exceed the price allocable to the

product or any part thereof which gives rise to the claim. In no event will Symetrix be liable for

any incidental or consequential damages including but not limited to damage for loss of

revenue, cost of capital, claims of customers for service interruptions or failure to supply, and

costs and expenses incurred in connection with labor, overhead, transportation, installation or

removal of products or substitute facilities or supply houses.

Содержание 571 SPl





























Отзывы: