background image

506E Headphone Amplifier
User’s Guide

© August 2000 Symetrix, Inc.

All rights reserved.

Printed in the United States of America

Symetrix Part Number 53506E-0A00

The information in this guide is subject to
change without notice. Symetrix, Inc. shall
not  be  liable  for  technical  or  editorial
errors or omissions contained herein; nor
is it liable for incidental or consequential
damages  resulting  from  the  furnishing,
performance, or use of this material.

Mention of third-party products is for in-
formational purposes only and constitutes
neither an endorsement nor a recommen-
dation. Symetrix assumes no responsibil-
ity with regard to the performance or use
of these products.

Under copyright laws, no part of this user
guide may be reproduced or transmitted
in any form or by any means, electronic or
mechanical, without permission in writing
from Symetrix, Inc. If, however, your only
means of access is electronic, permission
to  print  one  copy  is  hereby  granted.
Permission  to  copy  the  Architects  and
Engineers  Specificiations  for  written
proposals specifying equipment for sound
reinforcement systems is, also, granted.

Symetrix, Inc.
14926 35th Ave West
Lynnwood WA 98037-2303
USA

Tel:

425.787.3222

Fax:

425.787.3211

Web:

www.symetrixaudio.com

Email: [email protected]

Содержание 506E























Отзывы: