Symbol WSS 1000, Руководство по продукции

Страница: 66 / 133

5-9
Operating the WSS 1000
Assembling the WS 1200 Scanner
The WS 1200’s mount can be used by both right and left-handed users.
Note: Verify that the WSS 1000 has the correct data cable, shown below, for
use with the WS 1200 scanner.
Figure 5-14. WS 1200 Data Cable
1. Assemble the WWC 1000 wrist computer in the mount as directed in Assembling the
WWC 1000 (Standard Unit) on page 5-1 .
2. Plug the trigger cable in the scan port on the back of the scanner.
Figure 5-15. Inserting Trigger Cable
3. Plug the data cable from the WWC 1000 in the interface port on the back of the WS
1200 scanner. The data cable connector is molded to fit next to the trigger cable
connector.
Figure 5-16. Inserting Data Cable
4. Place the WS 1200 on the mount, securing with the velcro.
Scan Port
Trigger Cable
Interface Port