Symbol WSS 1000, Руководство по продукции

Страница: 121 / 133

C-16
WSS 1000 Product Reference Guide
Ping Tests
During an AP ping test, the following screen is displayed and continuously updated.
Figure C-17. AP Ping Test Results
Each ping displays a new line which shows the cumulative ping count, error count, AP
identifier of the AP the terminal is associated with, and the RSSI value of the terminal
reception. If there was an error, an indicator appears at the right end of the line (see line 5 in
Figure C-17 ). The report wraps around so that, at any given time, the last five message reports
are visible.
The ‘A’ at the left of line 2 in Figure C-17 indicates that the terminal is associated with an AP.
A ‘U’ indicates that the terminal is not associated.
When the ping test is running in non-stop mode, if either of the count fields overflows, the
first detail line is pre-empted to show the most significant digits of the count, prefixed with
an asterisk (
Figure C-18 ).
Figure C-18. AP Ping Test Results (Non-Stop Mode)
AP PING TEST
A Cnt Err AP RS
56 2 04 36
57 2 04 36
58 3 04 36 TMO
59 3 04 36
55 2 04 36
Press ‘Q’ to Quit
AP PING TEST
A Cnt Err AP RS
* 6 * 2 04 36
57 2 04 36
58 3 04 36 TMO
59 3 04 36
55 2 04 36
Press ‘Q’ to Quit