18
V
R
C
8
9
0
0
R
a
d
i
o
T e
r
m
i
n
a
l
Applying the Regulatory Country Stamp(s)
Regulatory labels are applied to the device signifying the radio (s) are approved for use in the following
countries: United States, Canada, Australia, Japan & Europe 1,2.
Note
1
: For 2.4GHz Products: Europe includes, Austria, Belgium, Croatia, Denmark, Estonia, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Liechtenstein, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland, United Kingdom.
Note
2
: The use of 5GHz RLAN's has varying restrictions of use; please refer to the Symbol Declaration
of Conformity (DoC) for details, at http://www2.symbol.com/doc/
In addition to the list above other countries may require a regulatory stamp to be affixed to the product.
Please refer to www.symbol.com for the list of countries where mandatory stamps are required.
For countries that require regulatory label, a sheet of stamps may be enclosed within the package.
If the appropriate stamp(s) is/are not provided, please contact your supplier.
To apply the country stamp:
1.
Peel the stamps appropriate to the country where this device is to be used.
2.
Apply the country stamps in the space provided on the regulatory label
Operation of the device without a regulatory label or the correct country Stamp is illegal.
Health and Safety Recommendations
For Vehicle installations and use
1.
An air bag inflates with great force. DO NOT place objects, including either installed or portable
wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the air bag inflates, serious injury could result.
2.
Position your device within easy reach. Be able to access your device without removing your
eyes from the road.
3.
Do not take notes or use the device while driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your primary responsibility, driving safely.
FCC RF Exposure Guidelines
Note
: Only applicable for Wireless Enabled Devices
Safety Information
The device complies with Internationally recognised standards covering Specific Absorption Rate
(SAR) related to human exposure to electromagnetic fields from radio devices..
Reducing RF Influence - Use Properly
It is advisable to use the device only in the normal operating position and it is recomended that no part
of the human body be allowed to come too close to the antenna during operation of the equipment.
Handheld Devices
This device was tested for typical body-worn operation. The use of third-party belt-clips, holsters,
and similar accessories should not contain metallic components in its assembly. The use of these
accessories that do not satisfy these requirements may not comply with FCC RF exposure
compliance requirements, and should be avoided.
Remote and Standalone Antenna Configurations
To comply with FCC RF exposure requirements, antennas that are mounted externally at remote
locations or operating near users at stand-alone desktop of similar configurations must operate with
a minimum separation distance of 20 cm from all persons.
Содержание VRC 8900
Страница 1: ...V R C 8 9 0 0 R a d i o T e r m i n a l ...
