Symbol Series 6800, Руководство по продукции

Страница: 125 / 138

E-14
Series 68XX Product Reference Guide
Note: Press Q in any subsequent menu to return to the DIAG24 menu or to
exit DIAG24 from this menu.
2. Press either (1) AP Ping Test or (2) Field Diagnostics. Press Q to quit.
Whichever mode was selected from the DIAG24 menu, the subsequent set-up menus
that follow are identical, except for the title line which indicates the selected test
mode: AP PING TEST for selection 1; FIELD DIAGNOSTICS for selection 2 (see
Figure E-13 ).
Figure E-13. Test Mode Screen
3. Select the roaming mode. For each AP listed by line number:
s
If you select Roaming Enabled, the terminal pings the associated AP and roams
as required between APs.
s
If you select a specific AP in the list, the test is conducted solely with that AP.
s
If more APs are in range than can fit on one screen, the last selection is “More”.
Select this to present more APs for selection.
bb represents the AP identifier (or BSS identifier)
eeeeeeeeeeee is the 48-bit MAC address of the AP in hexadecimal
notation.
<Test Mode>
1. Roaming Enabled
2. bb--eeeeeeeeeeee
3. bb--eeeeeeeeeeee
:::
:::
n. bb--eeeeeeeeeeee
Select [1-n or ‘Q’]: