Symbol MK2000 MicroKiosk, Руководство по продукции

Страница: 46 / 194

2-16
MK2000 MicroKiosk Product Reference Guide
Peripherals
Peripheral devices such as a printer, decoded external scanner or RS-232 communicating
devices can attach to the MK2000. This port can be used for serial communication with a
host, connection of an external device like a printer or for the connection of an decoded
external scanner, for port locations, see Figure 1-3 on page 1-5. The Printer/Scanner (RS-
232) port can to supply power to peripheral devices (up to 500mA).
It is important to confirm the connector pin-out before attaching the cable. For connector
pin-outs, see Printer/Scanner (RS-232) Port Connections on page 2-21. To connect an
external device:
1. Attach the auxiliary device’s cable to the Printer/Scanner (RS-232) port on the
MK2000, see Figure 1-3 on page 1-5 for port locations. Ensure the cable is
terminated properly. For Printer/Scanner (RS-232) Port Connections pin-outs see
Table 2-4.
2. If not already connected, plug the other end of the cable into the auxiliary device.
Signage
The Signage placard mounting brackets and attaching screws are provided in the Signage
Mounting Kit. The mounting brackets will accommodate foam core or other material signs
mounted on the MK2000, in the thickness range of 1/8” to 3/8”. Refer to Figure 2-1 on page
2-3 for cutout dimensions.
Signage Mounting Kit Installation:
1. Position the mounting brackets on the back of the MK2000 as shown in Figure 2-
10 on page 2-17. Attach the mounting brackets using supplied screws.
2. Trim the sign (customer provided) to 7 5/8 inch wide and 7 1/4 inches high (see
dimensions shown in Figure 2-1 on page 2-3). The cut out in the sign is shown in
Figure 2-11 on page 2-18.
3. Slide the sign under the mounting brackets, see Figure 2-11 on page 2-18.
4. The finished sign will be displayed as shown in Figure 2-11 on page 2-18.