Symbol LS3478-ER, Справочное руководство

Страница: 35 / 371

Symbol LS3478 Product Reference Guide 2-4
Beeper Definitions
The scanner emits different beeper sequences and patterns to indicate its status. Table 2-1 defines beep sequences that occur during
both normal scanning and while programming the scanner.
Table 2-1. Standard Beeper Definitions
Beeper Sequence Indication
Standard Use
Short low-short medium-short high beeps Power up.
One short high beep A bar code symbol was decoded (if decode beeper is enabled).
Four long low beeps A communication error occurred while transmitting a scanned symbol to a host. The data is ignored.
This occurs if the scanner is not properly configured or if the scanner has disconnected from the cradle.
Long low-high beeps Attempt to pair with the cradle was unsuccessful. Ensure that the cradle has power; if not, cycle power
to the cradle and re-attempt the pairing.
Four short high beeps Low battery indication.
Long low-high-low-high beeps Attempt to pair with a cradle that is already paired with the maximum number of scanners.
Five long low beeps Conversion or format error.
Low-high-low beeps ADF transmit error.
Short high-short high-short low-short low beeps Radio failure.
Cordless Scanner Connection
Short low-short high beeps The scanner has connected to the cradle after scanning a pairing bar code or automatically after a
disconnect.
Short high-short low beeps The scanner disconnected from the cradle either because the scanner moved out of range of the
cradle, the USB host suspended the cradle, or cradle power was interrupted.
Parameter Menu Scanning
Short high beep Correct entry scanned or correct menu sequence performed.
Long low-long high beeps Input error; incorrect bar code, programming sequence or ‘ Cancel ’ scanned. Scanner remains in ADF
program mode.
Short high-short low beeps Keyboard parameter selected. Enter value using numeric bar codes.
Short high-short low-short high-short low beeps Successful program exit with change in the parameter setting.
ADF Programming Normal Data Entry
High-low beeps Enter another digit. Add leading zeros to the front if necessary.
Low-low beeps Enter another alphabetic character or scan the End of Message bar code.
High-high beeps Enter another criterion or action, or scan the Save Rule bar code.
High-low-high-low beeps Rule saved. Rule entry mode exited.
High-low-low beeps All criteria or actions cleared for current rule, continue entering rule.
Low beep Delete last saved rule. The current rule is left intact.
Low-high-high beeps All rules have been deleted.
Short low-short high-short low-short high beeps Out of host ADF parameter storage space. Scan Set Default Parameter on page 4-5 .
ADF Programming Error Indications
Low-high-low-high beeps Out of rule memory. Erase some existing rules, then try to save rule again. (It is not necessary to re-
enter the current rule.)