Symbol LS 5700 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 352

Symbol LS 5700 Скачать руководство пользователя страница 4

©1997-2003 by Symbol Technologies, Inc. All rights reserved.

No part of this publication may be reproduced or used in any form, or by
any electrical or mechanical means, without permission in writing from
Symbol. This includes electronic or mechanical means, such as
photocopying, recording, or information storage and retrieval systems.
The material in this manual is subject to change without notice.

The software is provided strictly on an “as is” basis. All software,
including firmware, furnished to the user is on a licensed basis. Symbol
grants to the user a non-transferable and non-exclusive license to use each
software or firmware program delivered hereunder (licensed program).
Except as noted below, such license may not be assigned, sublicensed, or
otherwise transferred by the user without prior written consent of
Symbol. No right to copy a licensed program in whole or in part is
granted, except as permitted under copyright law. The user shall not
modify, merge, or incorporate any form or portion of a licensed program
with other program material, create a derivative work from a licensed
program, or use a licensed program in a network without written
permission from Symbol. The user agrees to maintain Symbol’s copyright
notice on the licensed programs delivered hereunder, and to include the
same on any authorized copies it makes, in whole or in part. The user
agrees not to decompile, disassemble, decode, or reverse engineer any
licensed program delivered to the user or any portion thereof.

Symbol reserves the right to make changes to any software or product to
improve reliability, function, or design.

Symbol does not assume any product liability arising out of, or in
connection with, the application or use of any product, circuit, or
application described herein.

No license is granted, either expressly or by implication, estoppel, or
otherwise under any Symbol Technologies, Inc., intellectual property
rights. An implied license only exists for equipment, circuits, and
subsystems contained in Symbol products.

Symbol, Spectrum One, and Spectrum24 are registered trademarks of
Symbol Technologies, Inc. Other product names mentioned in this manual
may be trademarks or registered trademarks of their respective companies
and are hereby acknowledged.

Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, New York 11742-1300

http://www.symbol.com

«
...
2
3
4
5
6
...
»

Содержание LS 5700

































































































































































































































































































































































Отзывы:

Нет отзывов