Symbol LS 3070, Краткое руководство пользователя

Страница: 34 / 52

32
L S 3 0 7 0 S c a n n e r
Recharging the Battery
When necessary, recharge the batteries. To do so with the RL 470
base/charger:
• Connect the power supply to the power input port on the
front panel of the RL 470 base/charger, as illustrated below.
• Connect the power supply to a receptacle supplying AC power
of the proper voltage level.
• Then place the scanner into the base/charger cradle, so that
the nose of the scanner and tip of the handle fit snugly into the
receptacles. Check the charge status indicator (blinking rapid-
ly = fully charged) for full charge, which occurs in less than
two hours. However, the scanner can be used on less than full
charge.
Power Supply
Connection Port
