Symbol iPOS TC, Руководство по продукции

Страница: 20 / 54

2-4
iPOS TC Product Reference Guide
RS-485 Installation
To install the iPOS TC in an RS-485 configuration:
1. Shut off power on the POS host device.
2. Plug the serial cable’s 15-pin connector (HDB15) into the serial port on the back of
the iPOS TC.
3. Plug the SDL connector into one of the following ports on the POS host device:
4B, 9A, 9B, or 9E.
4. Turn on the POS host device. The iPOS TC autoconfigures to RS-485.
Figure 2-2. RS-485 Configuration
iPOS TC
SDL Connector
HDB15 Connector
POS Host Device