manualshive.com logo in svg

Symbol Hotspot LS 2100, Руководство по продукции

Поделиться
Скачать
Symbol Hotspot LS 2100 Скачать руководство пользователя страница 86

6-13

RS-232 Interface

Hardware Handshaking

The data interface consists of an RS-232 port designed to operate either with or without the 
hardware handshaking lines, 

Request to Send (

RTS

)

, and 

Clear to Send (

CTS

)

.

If Standard RTS/CTS handshaking is not selected, scan data is transmitted as it becomes 
available. If Standard RTS/CTS handshaking is selected, scan data is transmitted 
according to the following sequence: 

•

The scanner reads the CTS line for activity. If CTS is asserted, the scanner waits 
up to 2 seconds for the host to negate the CTS line. If, after 2 seconds (default), 
the CTS line is still asserted, the scanner sounds a transmit error, and any scanned 
data is lost.

•

When the CTS line is negated, the scanner asserts the RTS line and waits up to 2 
seconds for the host to assert CTS. When the host asserts CTS, data is 
transmitted. If, after 2 seconds (default), the CTS line is not asserted, the scanner 
sounds a transmit error, and discards the data.

•

When data transmission is complete, the scanner negates RTS 10 msec after 
sending the last character.

•

The host should respond by negating CTS. The scanner checks for a negated CTS 
upon the next transmission of data.

During the transmission of data, the CTS line should be asserted. If CTS is deasserted for 
more than 50 ms between characters, the transmission is aborted, the scanner sounds a 
transmission error, and the data is discarded.

If the above communications sequence fails, the scanner issues an error indication. In this 
case, the data is lost and must be rescanned.

If Hardware Handshaking and Software Handshaking are both enabled, Hardware 
Handshaking takes precedence.

Note:

The DTR signal is jumpered to the active state. 

Содержание Hotspot LS 2100































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды