Symbol DS 3408, Руководство по продукции

Страница: 277 / 406

Advanced Data Formatting 15 - 29
Setup Field(s)
Send Data (continued)
Send Next 19 Characters
Send Next 20 Characters
Table 15-1
Setup Field(s) Definitions
Parameter Description Page
Move Cursor
Move Cursor To a Character Scan Move Cursor To Character on page 15-30 , then any printable
ASCII character from the Alphanumeric Keyboard . When this is
used, the cursor moves to the position after the matching character.
If the character is not there, the rule fails and ADF tries the next rule.
15-30
Move Cursor to Start of Data Scan this bar code to move cursor to the beginning of the data. 15-30
Move Cursor Past a Character This parameter moves the cursor past all sequential occurrences of
a selected character. For example, if the selected character is ‘A’,
then the cursor moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan
Move Cursor
Past Character on page 15-30 , then select a character from the
Alphanumeric Keyboard . If the character is not there, the cursor
does not move (i.e., has no effect).
15-30
Skip Ahead “N” Characters Scan one of these bar codes to select the number of positions
ahead to move the cursor. 15-31
Skip Back “N” Characters Scan one of these bar codes to select the number of positions back
to move the cursor. 15-32
Send Preset Value Send Values 1 through 6 by scanning the appropriate bar code.
These values must be set using the prefix/suffix values in
Table 7-4
on page 7-20 .
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
15-34