Symbol CRD 7200, Краткое руководство пользователя

Страница: 4 / 12

2
C R D 7 2 0 0
S i n g l e - S l o t C r a d l e
Setup
Place the cradle on a tabletop and connect the power and communication
cables.
Connecting Power
1. Connect the power supply
cable to the power port on
the back of the cradle. Con-
nect the DC power supply
cable’s AC connector to a
standard electrical outlet.
2. At power-up, the COM LED
lights yellow for 3 seconds,
then blinks seven times.
Connecting the RS-232 Cable to a Host Computer,
Printer or Modem.
Note: In most cases, you must use a null-modem cable. However, mo-
dems and some serial printers (DCE-type) require a DB9 or
DB25 connection. For a DB25 connection, use cable p/n 25-
19297-01. For a DB9 connection, use cable p/n 25-19299-01
(see your System Administrator).
1.
Plug the RS-232 serial
communication cable
into the RS-232 port lo-
cated on the back of cra-
dle.
2. Connect the other end of
the cable to the serial
(COM) port of the host
computer or printer.
Power Port
RS-232 Port