3
Q
u
i
c
k
R
e
f
e
r
e
n
c
e
Cradle Set-up
Connecting to Power
The cradle provides power to a PPT 2700 or PPT 2800 terminal,
and re-charges terminal batteries.
Note: Use only a Symbol-approved power supply (p/n 50-14000-
107) output rated 9 VDC and minimum 2 Amperes. The
power supply is certified to EN60950 with SELV outputs.
Benutzen Sie nur eine Symbol Technologies genehmigt
Stromversorgung in den Ausgabe: 9 Vdc und minimum 2
Amperes. Die Stromversorgung ist bescheinigt nach
EN60950 mit SELV Ausgaben.
To connect the cradle to a power source:
1. Connect one end of the power input cable to the power port
on the back of the cradle.
2. Connect the other end of the power input cable to a wall
outlet, as shown below.
3. To see if the cradle has power, insert and power on a terminal.
-
If the Terminal Status LED turns red, the cradle has pow-
er. Note that if the battery is already fully charged the
LED turns green.
-
If the Terminal Status LED does not react, the cradle may
not be receiving power, or the terminal may not be com-
Serial Port
Power Port
Power Input
Cable
