Symantec NetBackup 5230 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 69

background image

See

“Power cord usage”

on page 48.

Power safety

The power supply in this product contains no user-serviceable parts. There may
be more than one supply in this product. Refer servicing to qualified personnel only.

Do not attempt to modify or use the supplied AC power cord if it is not the exact
type required. A product with more than one power supply always comes with a
separate AC power cord for each supply.

The power button, DOES NOT completely turn off the AC power. A 5V standby
power is still active whenever the system is plugged in. To remove AC power from
the appliance, you must unplug each AC power cord from the outlet or the power
supply.

The power cord(s) is considered the disconnect device to the main (AC) power.
The socket outlet that the appliance plugs into, should be installed near the
equipment and should be easily accessible.

Power cord usage

If an AC power cord was not provided with the product, purchase two that are
approved for use in your country.

To avoid electrical shock or fire, check the power cords to be used with the product
and read the following information:

■

Never attempt to modify or use the AC power cord(s) if they are not the exact
type that is required for your location.

■

The power cord must have an electrical rating that is greater than the electrical
current rating marked on the product.

■

The power cord must have a safety ground pin or contact that is suitable for the
electrical outlet.

■

The power supply cord(s) is/are the main disconnect device to AC power. The
sockets or outlets must be near the equipment and readily accessible for
disconnection.

■

The power supply cords must be plugged into the sockets or the outlets that are
provided with a suitable earth ground.

See

“Power cord criteria”

on page 49.

48

Detailed safety and maintenance information

Power safety

«
...
46
47
48
49
50
...
»

Содержание NetBackup 5230






































































Отзывы:

Нет отзывов

Похожие инструкции для NetBackup 5230

Бренд: dallmeier Страницы: 34

Cheetah 15K.7 SAS ST3300557SS

Бренд: Seagate Страницы: 76

NSLU2 - Network Storage Link NAS Server

Бренд: Linksys Страницы: 64

Бренд: IBM Страницы: 258

HyperDrive COLORSPACE

Бренд: SANHO Страницы: 31

Бренд: Buffalo Страницы: 2

Бренд: Navisys Technology Страницы: 21

Бренд: Quantum Страницы: 32

Бренд: LaCie Страницы: 26

Бренд: Bosch Страницы: 30

Бренд: Bosch Страницы: 68

Бренд: Seagate Страницы: 31

Бренд: G SPEED Страницы: 2

Бренд: Western Digital Страницы: 4

PREMIER 15151GK

Бренд: ABSCO SHEDS Страницы: 21

Premier 23231GK

Бренд: ABSCO SHEDS Страницы: 25

Бренд: ABSCO SHEDS Страницы: 25

Бренд: Cavalry Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды