Symantec NetBackup 5020, Регулярное техническое обслуживание

Страница: 37 / 60

NetBackup 5020
Routine Maintenance 4 Guide to the Routine Maintenance Using the System
Monitor Interface
Issue 01 (2010-12-10) Symantec Corporation 4-7
Table 4-2 Description of parameters related to the CPU status
Parameter Description
Status The state of the CPU.

Presence detected indicates that the CPU is working normally.

Failure detected indicates that the CPU is absent.
Voltage The voltage of the CPU.
The Voltage value ranges between LowWaterMark and
HighWaterMark , that is, between 0.530 Volts and 1.760 Volts .
LowWaterMark Lowest value of the CPU voltage. The value is 0.530 Volts .
HighWaterMark Highest value of the CPU voltage. The value is 1.760 Volts .
ErrorStatus CPU status.
 If the value of ErrorStatus is 0 , it indicates that a CPU is working
normally.
 If the value of ErrorStatus is 1 , it indicates that a CPU is working
abnormally.
----End
Exception Handling
If the CPU is in the Failure detected state, contact the technical support engineers.
4.3 Viewing the Disk Status
This section describes how to check the disk status on the system monitoring interface. By
checking the disk status, you can know whether the disk works normally.
Impact on the System
None.
Reference Standard

The normal state of a system disk is Online .

The normal state of a data disk is Online or Unconfigured(good) .

The normal state of a hot spare disk is Hotspare .
Procedure
Step 1
Log in to the system monitoring interface.
For the detailed procedure, see Log into the system monitoring interface .
Step 2
Expand the node in the navigation tree, and then click Disk , as shown in Figure 4-8 .