Copyright © 2017 Symantc Corp. All rights reserved. Symantec, the Symantec Logo, the Checkmark Logo, Blue Coat, and the Blue Coat logo are trademarks or registered trademarks of Symantec Corp. or its affiliates in the U.S. and other countries. Other names may be trademarks of their respective owners. This document is provided for informational purposes only and is
not intended as advertising. All warranties relating to the information in this document, either express or implied, are disclaimed to the maximum extent allowed by law. The information in this document is subject to change without notice. Part Number: 231-03280 Rev E.0
THE DOCUMENTATION IS PROVIDED “AS IS” AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
SYMANTEC CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE. SYMANTEC CORPORATION PRODUCTS, TECHNICAL SERVICES, AND ANY
OTHER TECHNICAL DATA REFERENCED IN THIS DOCUMENT ARE SUBJECT TO U.S. EXPORT CONTROL AND SANCTIONS LAWS, REGULATIONS AND REQUIREMENTS, AND MAY BE SUBJECT TO EXPORT OR IMPORT REGULATIONS IN OTHER COUNTRIES. YOU AGREE TO COMPLY STRICTLY WITH THESE LAWS, REGULATIONS AND REQUIREMENTS, AND ACKNOWLEDGE THAT
YOU HAVE THE RESPONSIBILITY TO OBTAIN ANY LICENSES, PERMITS OR OTHER APPROVALS THAT MAY BE REQUIRED IN ORDER TO EXPORT, RE-EXPORT, TRANSFER IN COUNTRY OR IMPORT AFTER DELIVERY TO YOU.
Page 2
Technical Support
o
Contact Information
—
https://support.symantec.com/en_US/contact-support.html
o
MySymantec
—
https://mysymantec.force.com/customer/s/
Documentation
o
Go to
https://support.symantec.com/en_US/Documentation.html
and search for
"Security Analytics"
o
Select
Administration Guide
or
Hardware Guide
for the document type.
When adding J5300 storage modules to an existing SAS-2 system keep the following in mind:
o
Adding storage modules is a destructive process:
Do not begin to add new storage until after
you have backed up all data.
o
Contact Symantec support for assistance in calculating the new drive allocation.
231-03280 rev E.0
Module 5
Module 3
Module 1
Module 2
Module 4
Module 6
SAS-2 RAID Controller 1
SAS-2 RAID Controller 2
1
Controller Status
2
Internal Use Only
3
Not Used
4
SFF-8644 SAS Ports
5
Power Supply On/Off Switch
6
AC Power Indicator
7
Fault Indicator
8
Not Used
9
DC Power-Supply Status
10 Standby Power Indicator
1
AC Power Indicator
2
Global Enclosure Status
3
Controller 1 Activity
4
Controller 2 Activity
5
System Heartbeat
6
Drive Status
7
Drive Power/Activity
Existing
SAS-2 to
SAS-2
Cabling
Security Analytics appliances that have one RAID controller can support one storage
module only. For SAS-2 RAID controllers, attach the storage module to the head unit using
SAS-2 to SAS-3 cables.
SAS-2 RAID Controller
SAS-3 RAID Controller
Integrating the J5300 with an Existing SAS-2 Environment
Module and Power-Supply Indicators
Front-Panel and Drive Indicators
Connecting a J5300 to a Single RAID Controller
08c
08b
If you are connecting only one storage module to a unit that has two RAID controllers,
DO NOT
connect the module to both RAID controllers.
SAS-3 RAID Controllers
SAS-2 RAID Controllers
