The following are the issues that were fixed in the MR1 of Barcode Solution.
Table 1-3
Fixed issues in Barcode Solution
Issue
Internal ID
In the Symantec Management Console, the expiry notifications are not displayed
to the user upon the license Expiration. User has to look into the Altiris Log on an
operation failure and discover that the license has expired.
2025860
On the
License View
page, in the
Device Licenses
list, the reclaimed licenses are
still shown with the status 'Reclaim Pending'.
2025860
Delete functionality on Device licenses does not release the licenses in real time.
You have to wait for a few minutes before the licenses are reclaimed.
2025860
License Usage does not show total license count and number of the licenses that
are in use.
2025860
Deployment Solution
Build number 7.1.607
The following are things to know about in this release.
Table 1-4
Things to know in Deployment Solution
Things to know
Internal ID
During initial install of Deployment Solution 7.1 the PXE services are installed but
not started. After the install, it is up to the administrator to go into services, start
the service, and change its properties from “Manual” to “Automatic” every time
the computer reboots. However, after you upgrade to MR1, that service is
stopped and its property is set back to “Manual”, which means that all customers
with existing Deployment Solution 7.1 PXE environments that are started need to
go back into services and set the PXE service to “Automatic”.
Warning messages appear in the Log Viewer, while performing an upgrade from
Deployment Solution 7.1.598 to Deployment Solution 7.1.603. However, the
upgrade is completed successfully.
2048065
The following are the issues that were fixed in the MR1 of Deployment Solution.
Table 1-5
Fixed issues in Deployment Solution
Issue
Internal ID
On the create new
Deploy Image
task page, the
Browse
button of the
Sysprep
Configuration
option opens
NSCap
folder instead of
Deployment
folder.
1677907
