8
If you have another .slf file for a different feature, repeat steps
4
,
5
, and
7
.
9
When all your .slf files are successfully registered, click Next.
Updating a new appliance to the latest software
If your software is up-to-date, the Setup Wizard is displayed. Skip to the next
section.
If a software update is available, the Software Update page is displayed. Symantec
strongly recommends that you apply all available updates.
On the Software Update page you can:
■
Click Skip to update your software later.
■
Click Update to update your software now. After the update, the Setup Wizard
is displayed.
Note:
When you have finished updating the Control Center appliance, either
click your browser's refresh button or close and re-open it to ensure that cached
versions of graphics are redisplayed correctly.
Updating an appliance that is running a previous version of Symantec Mail Security
is described in a separate section.
See
“Migrating to Symantec Mail Security 7.5”
on page 49.
Setting up a Control Center with optional Scanner
Setting up your appliances involves setting up the Control Center and then using
the Setup Wizard on the Control Center to configure all of your site-wide settings.
Depending on how you plan to use this appliance, perform the remaining setup
tasks as follows:
■
If you plan to use this appliance as your Control Center only, or as both your
Control Center and as a Scanner, continue with the procedures in this section.
■
If you plan to use this appliance as a Scanner only, follow the Scanner setup
procedure.
See
“Setting up a Scanner”
on page 40.
Many of the site-wide settings that you will specify as you use the Setup Wizard
are actually site defaults that you can later vary for each Scanner you add.
35
Setting up the Symantec Mail Security Appliance
How to set up the appliance