background image

32cm

32cm

32cm

7cm

Main Specifications

Drone’s Length: 32cm        Drone’s Width : 32cm   

Drone’s Height: 7cm          Motor’s Model :      8x16

Battery : 3.7V 500mAh lithium battery

Rectification Procedures

Problem

Reason

Solution

The drone

has no

response

1. The drone has entered into 

    low-voltage protection.

2. When the power of the remote 

    control is weak,the power light 

    indicator will blink.

1. Charge up the drone.

2. Change the batteries of the 

    remote control.

The flight 

response of 

the drone is 

not sensitive

1. The power of the remote control 

    is weak.

2. There is an interference with 

    the same frequency as that of 

    the remote control.

1. Change the batteries.

2. Change to a place where there

    is no interference with the same

    frequency.

The drone is

flying towards

its side in one 

direction during 

hovering

1. The drone is not calibrated 

    level to the ground.

1. Re-adjust the calibration until

    the drone is level to the ground.

    For further details, see No.3 on 

    Page 9 for details(Level 

    calibration function).

-16-

Содержание X5UW-D




















Отзывы: