User Manual UWMS-01 Version 2.3
© 2008~2010 SYM. All rights reserved.
Page 5
II. Installation Overview
Drawing 1 shows a typical installation when the UWMS-01 is set up with its supplied dipole antenna.
Make sure the received signal strength is greater than
-85 dBm
at the installation site.
Drawing 1 – Connecting the UWMS-01 to a DAS using a dipole antenna
If sufficient signal is not present at the installation site, you have a few options: (1) You can couple the
stronger signal from the Device’s
donor
port using an RF coupler. (See Drawing 2.);
Drawing 2 – Connecting the UWMS-01 to a repeater of which donor
signal is coupled to the UWMS-01’s antenna port
