7
7. Use of each component
OPERATION OF IGNITION SWITCH
“Start” position
Engine can be started in this position.
Ignition switch key can not be removed.
“Stop” position
Engine is shut off and can not be started in this position.
Ignition switch key can be removed.
“Handlebar lock" position
Turn the handlebar to left and press the ignition switch key
down and then lightly turn it to left to the “LOCK” position.
The handlebar is locked in this position.
Ignition switch key can be removed.
When unlocking, simply turn the key from “LOCK” to “OFF.”
WARNING:
Never operate the ignition switch key when the scooter is running. To turn the ignition switch to
“OFF” and “LOCK,” will shut off the electrical system and that may result in a dangerous accident.
Therefore, the ignition switch can only be turned off after the scooter has been completely stopped.
Always remove the key and be sure to take the key away with you after locking the handlebar
before leaving your scooter.
If ignition switch remains in the “ON” position for a prolonged period after the engine has been
stopped, the battery’s capacity will be reduced and this may affect the engine’s start ability.
USE OF BUTTONS
Engine Stop Switch
Switch to this position to turn off the engine when a state of emergency exists.
Switch to this position and the engine can be started.
IGNITION SWITCH
Electric Starter
Button
High/Low
Beam Switch
Turn Signal Switch
Horn Switch
Engine Stop
Switch